HD510

Load Rating: 175 lbs

Swing Radius: 31.2"

Max Torque: 1,275 in-lbs

Easy Crank: 700 in-lbs

The Model HD510-1023-IND15-B048 shown is typical and representative of the HD510 Models.

To receive a CAD model or a quotation:

The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 500 SERIES OPTIONS page and 500 SERIES CREATING A MODEL NUMBER pdf.
A smaller than standard swing radius may be recommended for some applications. See the "Technical Section" under "Holding Fixture Safety" on page 3 of 7 concerning "Unexpected Accident Loads" and the chart on page 4 of 7 referring to "Maximum Recommended Swing Radius"

Product Features

  • Safety Factor: 2 for Yield & 3 for Ultimate
  • Rated Load Capacity:
    • Dynamic, 0″ eccentricity: 175 lbs. (79 Kg.)
    • Dynamic, 5″ eccentricity: 175 lbs. (79 Kg.)
  • Operating Temperature: +32 to +104 °F (0 to +40 °C).
    • Contact factory for special applications with extended operating temperatures.
  • Trunnion Interface/Mount/Clamp Options:
    • Angle Interface
    • Mounting Plate Interface (1018 or P8*) 
                *P8 interface paired with index option will limit adjustable height range to 39.9” to 45.9”.
    • Board Clamp Interface
  • Materials: Steel construction
  • Finish: Flotron Blue powder coat with selected parts zinc plated.
  • Gearbox: 50:1 ratio with 6″ diameter crank
  • Choice of Main Beam Length
  • Main Beam Ball Lock Pins: Reliably prevents End Frames from slipping on Main Beams
  • Casters: 5″ diameter x 1 ¼” wide wheel with Performa tread and Tech Lock brake
  • Trunnion Brake Knob
  • A smaller than standard swing radius may be recommended for some applications. See the “Technical Section” under “Holding Fixture Safety” on page 3 of 7 concerning “Unexpected Accident Loads” and the chart on page 4 of 7 referring to “Maximum Recommended Swing Radius”
  • Optional Main Beam Lengths
  • Optional Trunnion Interface/Mount/Clamp
  • Optional Index Plate
  • Optional Casters
  • Optional Finishes for clean room compatibility
  • Optional Ground Lug and Drag Chain for use in electrostatically protected area (EPA’s)

As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications.

For 500 Series - Creating a Model Number pdf click here

For clarification of terms or phrases, please see the Holding Fixtures Definitions page.