200 SERIES 300 & 400 SERIES 500 SERIES 600 SERIES 700 SERIES 800 SERIES 900 SERIES 1000 SERIES 1100 SERIES 1200 SERIES CUSTOM MODELS OVERVIEW TABLE

HD425 Data Sheet The Model HD425-0000-B028-C5SPX shown belwo is typical and representative of the HD425 Models. For more information on specifying a holding fixture, see the 400 SERIES OPTIONS page and 400 SERIES CREATING A MODEL NUMBER pdf. Click for larger image  The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 400 SERIES OPTIONS page and 400 SERIES CREATING A MODEL NUMBER pdf.  Addition of an optional index plate decreases the vertical adjustment from 10" to 8" and increases the minimum trunnion height from 35.5" to 37.5". Product Features: Safety Factor: 2 Rated Load Capacity:   Dynamic, 0" eccentricity: 115 lbs. (52 kg.)   Dynamic, 5" eccentricity: 115 lbs. (52 kg.)   Static, 0" eccentricity: 370 lbs. (168 kg.)   Static, 5" eccentricity: 220 lbs. (100 kg.) Operating Temperature: +32 to +104 °F (0 to +40 °C) Contact factory for special applications with extended operating temperatures. Choice of Trunnion Interface/Mount/Clamp Options: Angle Interface Mounting Plate Interface Board Clamp Interface Scissors Clamp Interface Choice of Main Beam Length Main Beam Ball Lock Pins: Reliably prevents End Frames from slipping on Main Beams Casters: 5" diameter x 1 ¼" wide wheel with Performa tread and Tech Lock brake Gearbox 40:1 ratio with 4" diameter crank Materials: Steel construction Finish: Blue Paint or Powder Coat (at manufacturer's discretion), with selected parts zinc plated. Other finishes available upon request Trunnion Brake Knob Price Range: $2,200 - $3,800 Click for larger image Optional Main Beam Lengths or Telescopic Main Beam Optional Trunnion Interface/Mount/Clamp Optional Index Plate Optional Casters Optional Gear Box: 50:1 ratio with 6" diameter crank Optional finishes for clean room compatibility Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA's) For more about 400 Series Options click here All data presented is based on no modifications to the product. As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications. For 400 Series - Creating a Model Number pdf click here. - Note: viewing this document requires Adobe's Acrobat Reader. For clarification of terms or phrases, please see the Holding Fixtures Definitions page.

Product Features 400 Series Options Holding Fixture Definitions Model HD425 Dynamic Loading Chart 400 SERIES Creating A Model Number ( 12.9KB )

About Flotron | Holding Fixtures | Extractors | Product FAQs Tech Section | Contact Flotron Site Map | Help | Terms and Conditions Flotron, Inc. 2485 Coral Street Vista, CA 92081 USA (ph.) 760.727.2700  (fax) 760.727.3957