2630 Progress Street Vista, CA 92081 USA (ph.) 760.727.2700 (fax) 760.727.3957

The Model 961-J2-IND15-P15/A36-B074 shown below is typical and representative of the 961 Models. For more information on specifying a holding fixture, see the 900 SERIES OPTIONS page and the 900 SERIES CREATING A MODEL NUMBER pdf.  The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 900 SERIES OPTIONS page and 900 SERIES CREATING A MODEL NUMBER pdf.  A smaller than standard swing radius may be recommended for some applications. See the "Technical Section" under "Holding Fixture Safety" on page 3 of 7 concerning "Unexpected Accident Loads" and the chart on page 4 of 7 referring to "Maximum Recommended Swing Radius" Back to 961