The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 400 SERIES OPTIONS page and 400 SERIES CREATING A MODEL NUMBER pdf.

 Addition of an optional index plate decreases the vertical adjustment from 10" to 8" and increases the minimum trunnion height from 35.1" to 37.1".
 A smaller than standard swing radius may be recommended for some applications. See the "Technical Section" under "Holding Fixture Safety" on page 3 of 7 concerning "Unexpected Accident Loads" and the chart on page 4 of 7 referring to "Maximum Recommended Swing Radius"

• Safety Factor: 2
• Rated Load Capacity:
    Dynamic, 0" eccentricity: 40 lbs. (18 kg.)
    Dynamic, 5" eccentricity: 30 lbs. (14 kg.)
    Static, 0" eccentricity: 125 lbs. (57 kg.)
    Static, 5" eccentricity: 85 lbs. (39 kg.)
• Operating Temperature: +32 to +104 °F (0 to +40 °C)
  Contact factory for special applications with extended operating temperatures.
• Choice of Trunnion Interface/Mount/Clamp Options:
  Angle Interface
  Mounting Plate Interface
  Board Clamp Interface
  Scissors Clamp
• Choice of Main Beam Length
• Main Beam Ball Lock Pins: Reliably prevents End Frames from slipping on Main Beams
• Casters: 5" diameter x 7/8" wide wheel with Performa tread and metal sidelock brake
• Gearbox: 40:1 ratio with 4" diameter crank
• Materials: Steel construction
• Finish: Blue Paint or Powder Coat (at manufacturer's discretion), with selected parts zinc plated. Other finishes available upon request
• Trunnion Brake Knob
• Price Range: $1,600 - $6,300

A smaller than standard swing radius may be recommended for some applications. See the "Technical Section" under "Holding Fixture Safety" on page 3 of 7 concerning "Unexpected Accident Loads" and the chart on page 4 of 7 referring to "Maximum Recommended Swing Radius"

• Optional Main Beam Lengths or Telescopic Main Beam
• Optional Trunnion Interface/Mount/Clamp
• Optional Index Plate
• Optional Casters
• Optional Gear Box: 50:1 ratio with 6" diameter crank
• Optional finishes for clean room compatibility
• Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA's)
• For more about 400 Series Options click here.