200 SERIES 300 & 400 SERIES 500 SERIES 600 SERIES 700 SERIES 800 SERIES 900 SERIES 1000 SERIES 1100 SERIES 1200 SERIES CUSTOM MODELS OVERVIEW TABLE

1191 Data Sheet The Model 1191-J2-M-IND15-P26/A40-B080 shown below is typical and representative of the 1191 Models. To specify the correct model number for a specific holding fixture, see the 1100 SERIES OPTIONS pages and 1100 CREATING A MODEL NUMBER pdf. Click for larger image  The maximum distance between mounting interfaces is directly related to the main beam length. Specify the distance between mounting interfaces to be at or slightly larger than the length of the part-to-be-handled. The fixture can be adjusted to accommodate smaller length parts, however, the main beam(s) extending from each end frame may be inconvenient. For more information see the 1100 SERIES OPTIONS page and 1100 CREATING A MODEL NUMBER pdf. Product Features: Safety Factor: 3 Rated Load Capacity:   Dynamic, 0" to 7.5" eccentricity: 11,000 lbs. (4,990 kg.)   Dynamic, 15" eccentricity: 5,650 lbs. (2,563 kg.) Operating Temperature: +32 to +104 °F (0 to +40 °C) Contact factory for special applications with extended operating temperatures. Combination Mounting Plate / Angle Interface Choice of Main Beam Length Main Beam Ball Lock Pins: Reliably prevents End Frames from slipping on Main Beam Gearbox:Low backlash, stairstep resistant design with 1124:1 ratio and 14" diameter crank Casters: 10" diameter x 4" wide wheel with polyurethane tread, kingpinless swivel bearing, brake and swivel lock Index Plate:Standard with 15° index plate and index stops Materials: Steel construction Finish:Blue Paint or Powder Coat (at manufacturer's discretion), with selected parts zinc plated. Other finishes available upon request Price Range: PRICE ON REQUEST Click for larger image Optional motorized rotate drive with 1975:1 ratio gearbox and variable frequency motor control Optional Ground Lug and Drag Chain for use in electrostatically protected areas (EPA's) Optional Main Beam lengths Optional Leveling Jacks For more about 1100 Series Options click here All data presented is based on no modifications to the product. As Flotron is constantly improving products and methods of manufacturing, we reserve the right to modify and/or change design or specifications without notice. Please contact Flotron for verification of critical dimensions and specifications. For 1100 Series - Creating a Model Number pdf click here. - Note: viewing this document requires Adobe's Acrobat Reader. For clarification of terms or phrases, please see the Holding Fixtures Definitions page.

Product Features 1100 Series Options Holding Fixture Definitions 1191 Dynamic Loading Chart 1100 SERIES Creating A Model Number ( 69.8KB )

About Flotron | Holding Fixtures | Extractors | Product FAQs Tech Section | Contact Flotron Site Map | Help Flotron, Inc. 2485 Coral Street Vista, CA 92081 (ph.) 760.727.2700  (fax) 760.727.3957